Frames

  • 5/4” Frame grade (or better) alder hardwood (A renewable resource)

  • Joints are double doweled, (5/8” spiral dowels) glued, screwed and nailed

  • Corner blocked, gusseted and screwed or lag bolted as necessary

  • Exposed wood portion of frames can be manufactured in Maple, Beech, Mahogany and Exotic Woods

 

Seat Foundation

  • Sinuous (no sag) springs construction

  • 8 gauge spring wire (manufactured from recyclable material)

  • 5 inch or less spacing on center

  • Noise abating coated spring clips

  • Lateral stabilizing wrapped edge wire

  • 2 ounce bonded polyester insulator

  • Option – Pirelli webbing

  • Option – 2-8 way hand tied 8 gauge coil springs set on Indian jute webbing

 

Back Springing

  • Sinuous (no sag) springs construction

  • 4 inch or less spacing on center

  • Pirelli webbing

  • 11 or 12 gauge wire 

  • Lateral stabilizing wrapped edge wire

  • 2 oz bonded polyester insulator

  • Body Padding:

  • 85/15 gin flues cotton

  • Flexible polyurethane foam of appropriate IFD

  • Bonded polyester fiber

  • 1.1 oz low melt Dacron

 

Cushions

  • High quality 1.8lb to 2.5lb / cu ft HR flexible polyurethane foam of appropriate IFD

  • Polyester fiber wrap 1.1oz to 1.5oz low melt

  • Option – Marflex spring coils encased in 1.8 to 2.5lb / cu ft flexible polyurethane foam of appropriate IFD

  • 10/90 or 25/75 down wrap over flexible polyurethane foam core encased in down proof channeled ticking (down proof ticking meets CA TB117 & NFPA 260)

  • TRILLIUM Memory Fiber Fill over flexible polyurethane foam core encased in down proor channeled ticking.  Note: Trillium fiber is a hypoallergenic alternative to down with a 75% longer life and memory without sacrificing comfort.  

  • Breathable synthetic fabric bag enclosed non bonded polyester fiber (Dacron fill)